I have a Coleman Evcon Furnace and the fan does not work can I fix it? - evcon furnace
It depends on whether you diagnose why it is not. There is a generally open switch closes when the temp. and can increase the current in the motor. If you are familiar with a voltmeter to determine if the actual motor voltage. Doing so clearly, you need a new engine. If not, you have to configure a fault in the motor switch or the limit of re-. When this happens, you need to figure out why it overheated and caused the switch. As you can see, there is little that the number of care from one and a safe repair. This is not really a DIY project.
Thursday, February 11, 2010
Evcon Furnace I Have A Coleman Evcon Furnace And The Fan Does Not Work Can I Fix It?
3 comments:
Sorry, but unlikely to be the fan motor attatched a piece that will be launched with a special tool has traction. You could buy one, but it could pay more than someone to replace the engine costs.
the engine is screaming loudly, before it stops working? If so storage can be locked and you may be able to get rid of their fat. it will not last forever, but maybe get some time to heat.
You can also setup by the blade when you could be a problem with the collection or change of control does not work. Many things, before the engine can work to work.
I will leave to the cause of failure and all the basics and strongly recommend that people call HVAC - will do well, and is guaranteed to work properly. I say this because some people move beyond the comfort zone and then spend your money and not the job - and screw the system - then you need to work HVAC use only and will have to pay, and materials can materials are beyond repair on your installation. Throw away your money not wisely. Good luck.
yess I got a new motor does not
Post a Comment